Use And Care Manual

GENERAL SAFETY INSTRUCTIONS
**WARNING!** Read and understand all instructions. Failure to follow all instructions
listed below may result in electrical shock, fire and/or serious personal injury.
WORK AREA
• Keep your work area clear, clean and well lit. Cluttered work surfaces and dark areas invite
accidents.
• Keep people not involved in the work, especially children, away from the work area
while operating a power tool. Distractions can cause you to lose control of the tool.
• Do not operate power tools in an unsafe environment such as explosive atmosphere,
flammable liquids, gases and dust. A spark created by a power tool may ignite the fumes or
dust.
PERSONAL SAFETY
• Dress appropriately. Do not wear loose clothing or jewelry. Keep long hair in place and
contained. Keep clothing, hair and gloves away from moving parts. Loose clothing, jewelry
and hair can be snagged in moving parts.
• Use common sense, stay alert and watch what you are doing while operating a power tool. Do
not use tools while under the influence of alcohol, medication, or drugs. Keep focused on the
work at hand while using a power tool to prevent personal injury.
• Make sure the power switch is in the “OFF” position before plugging it into the receptacle.
This will prevent accidental starting. Carrying tools with your finger on the switch or plugging in
the tools with the switch in the “ON” position invites accidents.
• Remove adjusting tools such as wrenches or keys before turning the tool on. A wrench or key
left attached to a rotating part will fly off and may cause personal injury.
• Do not overreach while operating a power tool. Keep proper footing and balance at all times.
Good balance and solid footing enables better control in unexpected situations.
• Always wear appropriate safety equipment. Always wear eye protection while operating a
power tool. Use appropriate dust respirators, hearing protection, hard-hat, face shield or safety
shoes as dictated by the work and tool.
1
MAINTENANCE
Service
**WARNING!** NO USER SERVICEABLE PARTS INSIDE.
Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires
and components, which could cause serious hazard. Disconnect tool and/or charger from power source
before servicing.
Cleaning
**WARNING!** To avoid accidents, always disconnect the tool and/or charger from the power
supply before cleaning. The tool may be cleaned most effectively with compressed dry air. Always wear
safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to
clean by inserting pointed objects through opening.
CAUTION: Certain cleaning agents and solvents damage plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain
ammonia.
Questions, problems?
Before returning to your retailer, please reach us by:
• Phone: [phone] (toll-free)
Monday to Friday 9:00am - 5:00pm EST
• E-mail: [e-mail]
10