SDS

Manufacturer's Name : Jiangsu Youhe Tool Manufacturer Co.,Ltd

Address :Wanghu Road, Lianhu Industrial Park, Danyang City, Jiangsu Province, China . 212300

Product Name : TCT Saw blade

Formula: Carbon Steel, Mn steel and Carbide Material

Ingredient Max % CAS Number OSHA PEL(mg/M3) ACGIH TLV(mg/M3)

Carbon <2 7440-44-0 / /

Chromium <5 7440-47-3 1(as metal) 0.5

Cobalt <9 7440-48-4 0.1 0.02

Iron <90 7439-89-6 10 5

Manganese <2 7439-96-5 5 Ceiling 0.2

Molybdenum <10 9439-98-7 15(insoluble) 15(insoluble)

Nickel <2 7440-02-0 1 1.5

Silicon <2 7410-21-3 15 10

Tungsten <7 7440-33-7 / 5-TWA;10-STELl(metal)

Vanadium <3 7440-62-2 0.5 Ceiling,respirable 0.05

Ingredient Max % CAS Number OSHA PEL(mg/M3) ACGIH TLV(mg/M3)

Cobalt <11 7440-48-4 0.1 0.02

Tantalum Carbide <3 12070-06-3 / /

Tungsten Carbide <87 12070-12-1 / 5-TWA;10-STEL

Boiling point N/A Vapor pressure N/A

Melting point Vapor density N/A

Solubility in water Insoluble Percent volatile N/A

Appearance Metal Blade Evaporation Rate N/A

Odor None Specific gravity Approx.8

TCT saw blade have carbide tipped teeth or carbide grit cutting surfaces, the following metals are present in the

carbide teeth and grit :

Carbide-Tpped Tooth And Grit Componments

SECTION 3: PHYSICAL DATA

Appriximately 2800ºF

TCT Saw blades are manufactuered by steel, and are coated with a piants . Under normal cutting conditions, the

saw blade are considered to be articles in that they do not release more than very small quantities of hazardous

chemical and do not cause physical or health hazards as defined in the OSHA Hazar Communication Standard .

SECTION 2: HAZARDOUS INGREDIENTS

SECTION 1:GENERAL INFORMATION

MATERIAL SAFETY DATA SHEET

Saw Blade Metal Comoonents

The actual composition of the saw blades varies depending on the type of saw blade and the grade of steel it is

made from each blade may contain any of following ingredients:

The metal alloy may also contain less than one percent of sulfur, phosphorous, aluminum, cooper, tin, calcium,

antimony, nobium and arsenic .

PAGE 1
MATERIAL SAFETY DATA SHEET SECTION 1:GENERAL INFORMATION Manufacturer's Name : Jiangsu Youhe Tool Manufacturer Co.,Ltd Address :Wanghu Road, Lianhu Industrial Park, Danyang City, Jiangsu Province, China . 212300 Product Name : TCT Saw blade Formula: Carbon Steel, Mn steel and Carbide Material SECTION 2: HAZARDOUS INGREDIENTS TCT Saw blades are manufactuered by steel, and are coated with a piants .
PAGE 2
SECTION 4: FIRE AND EXPLOSION DATA TCT Saw Blades are made from non-combustible metals . SECTION 5: HEALTH HAZARD DATA Steel products in then form shipped do not present a health hazard . However, subsequent operation s such as cutting, grinding, welding may cause a release of dust or fumes which may cause some of the ingredients to change to a form which could affect workers if they are exposed to levels above the PEL and TLV listed in Section 2 .
PAGE 3
SECTION 8 : SPECIAL PROTECTION INFORMATION Ventilation: Mechanical ventilation should be used to capture, exhaust and collect airborne dusts and fumes . Personal Protective Equipment: Eyes: Safety glasses with side shields should be wron when the potential for eye contact with the saw blade, dusts or fumes exists . Skin:Cut resistant gloves when handling the saw blades; other body protection as appropriate .