！ Us ebol t st os ecur et hef r amet ot hegr oundt oagai ns tt hes t r ongwi nd.
Pole Beam Beam Beam Beam Corner Roof Bar Corner Roof Bar Connector Roof Bar Corner Roof Solidifying Bar 1 Roof Bar Corner Roof Solidifying Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar
2 Finishing Bar Finishing Bar Finishing Bar Finishing Bar Solidfying Bar Solidfying Bar Solidfying Bar Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
3
4
(1) Attach Part #B1 to Part #A with 4 Bolts #8 . (2) Attach Part #B2 to Part #A with 4 Bolts #6 . 5 (3) Attach Part #B to Part #A with 3 Bolts #8. (4) Repeat the above procedures to assemble the other three Part #A.
(1)Insert Part #X into Part #C1. (2) Insert Part #C into Part #C1 and secure with 4 Bolts #8. (3) Secure Part #X with 2 Bolts #3. 6 (4) Repeat the above procedures to assemble the other Part #C and Part #C1.
(1) Insert Part #X into Part #D1. (3) Insert the other side of Part #C2 into Part #D1 and secure with 4 Bolts #8. (2) Insert one side of Part #C2 into Part #D and secure with 4 Bolts #8. (4) Secure Part #X with 2 Bolts #3. 7 (5) Repeat the above procedures to assemble the other Part #D and Part #D1.
D1/C1 C/D D1/C1 C/D
C/D D1/C1 C/D D1/C1
C/D D1/C1 C/D D1/C1
Tighten all the bolts.
Assemble the 4 Corner Roof Bars: (1) Connect Part #E1 and Part #E with 2 Bolts #8. X4 (2) Attach Part #U to Part #E with Bolt #8. 12 (3) Attach Part #W1 to Part #E with Bolt #8. (4) Repeat the above procedures to assemble the other three pieces.
U
(1) Attach Part #U2 to Part #F/F1 with Bolt #6. 16 (2) Repeat the above procedures to assemble the other 3 pieces.
W1
Secure Part #T to Part #Z2, Part #S and Part #S1. ATTENTION: The holes of Part #Z2, Part #S and Part #S1 need to be aligned, on the same vertical line.
Insert Part #Q/Q1 into the hole that around the edge of Part #Z2.
ASSEMBLE ROOF PANELS: 26
(1) Insert Part #P3 into the top roof. 28 (2) Place Part #H2 on Part #E2, securing with Bolt #8. (3) Repeat these procedures to assemble the another side.
(1) Place Part #H1 and Part #H2 on Part #E1;put on Part #Y1 and secure with Bolt #8. H2 H (2) Place Part #H and Part #H2 on Part #E1;put on Part #Y1 and secure with Bolt #8. (3) Repeat these procedures to assemble the another side.
(1) Insert Roof Panels into the frame (L1&L&M&N&N1). (2) Repeat these procedures to assemble the another side.
(1) Insert Roof Panels into the frame(L1&L&N&N1). F1 F L1 L F1 F (2) Attach Part #G/G1 to the frame, securing with Bolt #6. (3) Repeat these procedures to assemble the another side.
(1) Place Part #G and Part #G1 on Part #E; put on Part #Y1 and secure with Bolt #8. (2) Repeat these procedures to assemble the other 3 corners.
