User manual

4. After each measurement, the laser is deactivated and must be

reactivated using the button

before the next measurement.

Delete the measurement by pushing the button .

You can also push the side MEAS button (3) to initiate the

measuring procedure.

g) Continuous measurement

In continuous measurement mode, measurement is conducted

continuously. This means that you can point the target laser at various

objects without rst starting a new measurement.

Measurements are taken in 0.5 second intervals and the values

are shown on the display. Measured values are not saved to

the memory.

The device can take a maximum of 100 continuous

measurements. When 100 continuous measurements are

reached, two audible signals sound and the target laser is turned

off.

1. Turn on the device.

2. Push and hold the

button (5) for approx. 1 second. The device

switches to continuous measurement mode.

3. The device automatically starts taking measurements and the values

are shown on the display.

» The measured distance is shown.

» In addition to the currently measured distance, the display shows

the maximum (MAX) and minimum (MIN) values.

4. You can pause continuous measurement mode at any time by

pushing the button

» The target laser will be turned off.

» Push the button

to switch the device back to individual

distance measurement mode.