User manual

57
6. Start a new measurement by pushing the button
.
7. Leave volume measurement mode by pushing the button
(depending on the display, you may need to push the button several
times).
l) Adding/subtracting volume measurements
Delete the measurements by pushing the button . Then repeat
the measurement.
1. Following the instructions contained in the chapter "k) Volume
measurement" on page 55, carry out a volume measurement.
2. Push the button (15) for addition or the button (7) for
subtraction.
3. Push the button
and carry out a second volume measurement.
4. The sum/difference of both volumes is shown in the lower line.
5. Add/subtract further volumes.
6. Leave volume measurement mode by pushing the button
(depending on the display, you may need to push the button several
times).