User manual

» The device begins emitting audible signals when you are approx.

10 cm away from the next measuring point. The signal interval

increases the closer you come. When you reach the measuring

point, a steady audible signal sounds and the symbol

appears.

8. You can now move toward the next target distance.

p) Time-delayed measurement

The device features a time-delayed measurement function. After a set

time runs down, the measurement is taken automatically.

1. Turn on the device.

2. Push the

key (17). The display shows the timer symbol.

3. Use the buttons

and to set the timer in seconds (max.

60 seconds). Push and hold the buttons for quicker incrementing.

4. The time-delay function activates automatically 2 seconds after input

and the measurement is taken after the timer runs down.

» An audible signal sounds after each second and simultaneously

briey interrupts the laser beam. The last two remaining seconds

are indicated with two audible signals.

13. Bluetooth®

The device features Bluetooth

for data interchange/control via external

devices. However, to this end an app on your external device is required.

1. Push and hold the

button (17) for approx. 1 second. On the

display, the Bluetooth

symbol appears to indicate the function is

activated.

» To turn off the Bluetooth

function, push and hold the button

for approx. 1 second. The Bluetooth

symbol disappears from

the display.

2. Refer to the help menu of your external device or its software to learn

more about connection and use.