Instructions


‐4‐

1.2 WIRED DEVICE CONNECTION
1．Connect the USB port of electron microscope deviceto the USB port of the
computer. The system will display “Find new hardware” window and finish
the driver installation automatically.
2.Run “Micro Cam” software through shortcut on the desktop or from “Start” →
“All programs”.
Note 1:
If you use “Micro Cam” program for the first time, please confirm whether the
device has been connected to the USB port of the computer. Otherwise, only
“ ” can be operated and “ ” and “ ”will fail to run.
Note 2:
For multiple USB ports, if you insert the device into the port for the first time, the
system will finish the driver installation for each USB port automatically.
Note 3:
You are advised to close Micro Cam program before you pull out the USB cable of
the device.
1.3 SOFTWARE OPERATION INTERFACE AND INSTRUCTION