User manual

ManualsBrandsTOOLCRAFT ManualsTool StorageDimensions:(L x W x H) 500 x 970 x 900 mm 9.4 kg

Assembly

Step 1:

First insert the four aluminium prole tubes (D) into the bottom deck (B). By means of a rubber

mallet, tap the section tubes gently into the corresponding slots on the deck.

If you do not have a rubber mallet, you may use a conventional hammer and a suit-

able padding such as a piece of soft wood. Place the wood on the section tube and

then tap the section tube gently into the corresponding slot on the lower bottom deck.

Do not apply excessive force, which may damage the aluminium prole tubes or

plastic decks and thus resulting in loss of guarantee/ warranty!

Step 2:

Place the top deck (A) on the four section tubes (D). Proceed as described in step 1 and insert

the section tubes into the slots on the top deck.

Step 3:

Insert the two plastic handle brackets (C) into the openings of the top deck (A) until they lock in

place. Both handles must point outward.

Step 4:

Turn the service cart upside down at 180°.

Put a snap ring (H) on each of the threads of the four castors (E + F).

One after the other drive in the four castors (E + F) into the appropriate threads on the bottom

deck (B). Make use of the at metal wrench (G).

The castors equipped with a brake (E) can be driven in at the longitudinal or the

transverse side, depending where and how you intend to use the service cart.

Turn the service cart over so that it is standing on the for castors. The service cart is now ready

for use.

Cleaning

Clean the product only with a soft, clean, dry cloth. For heavier soiling, you can moisten the

cloth with lukewarm water.

Do not use aggressive, chemical or scouring cleaning agents, as this may lead to discolouration

or changes in the material on the surface.

Technical data

Load capacity of the bottom deck .................max. 30 kg (no punctiform load)

Load capacity of the top deck .......................max. 30 kg (no punctiform load)

Dimensions. ..................................................900 x 500 x 970 mm (L x W x H)

Weight:. ........................................................9.4 kg

O P E R AT I N G I N S T R U C T I O N S

Service cart

Item no. 1296213

Intended use

The product is designed for home and hobby shop use and is equipped with two plastic shelves.

The service cart can be moved optimally and parked securely by means of four castors (two of

them with brakes).

The service cart comes disassembled and must be assembled in order to work. This is done in

only a few steps.

Please read these operating instructions carefully to ensure safe use and operation of the prod-

uct. Keep these operating instructions in a safe place for future reference. Always observe the

safety instructions and all other information included in these operating instructions.

Any use other than that described above is not permitted and can lead to damage of this prod-

uct; this can also lead to danger for the user.

This product meets applicable national and European requirements. All names of companies

Explanation of symbols

This symbol points to specic risks associated with handling, function and use.

The “Hand” symbol indicates special tips and operating information.

Package contents

• Service cart (disassembled)

A (1x)

B (1x)

C (2x)

D (4x)

E (2x)

F (2x)

G (1x)

H (4x)

A 1x top deck

B 1x bottom deck (including threads for castors)

C 2x handle

D 4x aluminium prole tube

E 2x castor with brake

F 2x castor

G 1x open-end wrench

H 4x snap ring

• Operating instructions

Safety instructions

The warranty/guarantee will be void in the event of damage caused by failure

to observe these operating instructions! We do not assume any liability for any

resulting damage!

We do not assume any liability for material and personal damage caused by

improper use or non-compliance with the safety instructions! In such cases,

the warranty will be null and void.

• For safety reasons, any unauthorised conversion and/or modication to the product

is not permitted.

• The product is not a toy and it should be kept out of the reach of children.

• Never overload the product. The permitted load capacity is max. 30 kg per deck (do

not accumulate load in one place!).

• Do not use to transport persons.

• Always place the service cart in such a way that it cannot tilt over or roll away.

• Always lock both brakes of the castors when you don’t move the service cart. This

applies especially when the ground is uneven or sloppy.

• While you push, keep hold of the service cart; never let it move on its own.

• In schools, educational centres, hobby and self-help workshops, the use of the

product is to be supervised by trained employees in a responsible manner.

• Do not leave the packaging material carelessly lying around, as it could become a

dangerous plaything for children.

• If you are in doubt about how to use the service cart correctly, or if you have any

questions not covered by these operating instructions, please contact our technical

support or any other specialist.

Version 03/15

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the

technical status at the time of printing.