User manual

39
3. If necessary, push the button C/Off (F) to deactivate the targeting
laser.
4. Push and hold the button C/Off for approx. two seconds to turn off
the device.
The product will turn off automatically after 3 minutes of
inactivity.
9. Settings
Unit
• By default, all measurements will be displayed in meters.
• Press the UNITS button (H) to select another unit.
• The corresponding indicator is displayed right next to the
measurement value.
• The following units are available:
Meter Foot Foot/Inch Inch
Length m ft 0’00” in
Area m² ft²
---
in
2
Volume m³ ft³
---
in
3
Measurement reference
• As per the factory default setting, measurements are taken
beginning from the back of the device.
• Press the measurement reference button (D), in order to change
the measurement reference. The following measurement references
are available: