User manual

42
13. Subtracting measurements
1. Measure the rst value.
2. Press the - button (E). The value just measured will be moved to the
previous line of the display.
3. Measure the second value. The second value is shown in the second
line on the display. The difference of both measurements is shown
in the lower line.
4. Follow the steps described above to subtract further measurements.
14. Continuous measurement
1. Press and hold the measurement button (C) for approx. two
seconds, in order to switch to continuous measuring mode.
2. The targeting laser (A) is activated. The distance is measured
continuously.
3. The display shows the maximum, minimum and last registered value
of the measurement process.