User manual

67
25. Tips and notes
• Light refraction and sunlight can cause measuring errors during
outdoor use. Perform measurements under suitable light conditions.
• When using the product outdoors, protect it from moisture and
humidity.
• The following surfaces can affect the measurement due to their
physical characteristics:
- Transparent surfaces (e.g. glass, water)
- Reecting surfaces (e.g. glass, shiny metals)
- Porous surfaces (e.g. insulating materials)
- Structured surfaces (e.g. roughcast, natural stone)
• Attach the hand strap to the eyelet (N).
• If needed, mount the product to a suitable tripod with a socket
diameter of 6.35 mm (1/4”).
26. Troubleshooting
Code Cause Solution
Err01
Measurement range
exceeded
Observe the correct
measurement range.
Err02
Reected signal too
weak
Choose another measurement
surface.
Err03
Beyond display range
(max. value: 99999)
Measure in smaller increments.
Err04 Calculation error Repeat the process.
Err05 Batteries weak Replace the batteries.
Err06
Beyond/below
operating temperature
Observe the correct operating
temperature.