User manual

64
Display unit
1. Press and hold the settings button (H) for approx. 2 seconds.
2. Briey press the settings button. The following is displayed:
3. Use the + (K) and – (E) buttons to select the desired unit. The
respective indicator appears in the lower right of the display. The
following units are available:
Length Area Volume
Meter m m
2
m
3
Foot ft ft
2
ft
3
Inch in ft
2
ft
3
Foot/inch 0’00”1/32 ft
2
ft
3
Inch 1/32 in ft
2
ft
3
Inch 1/16 in ft
2
ft
3
Inch 1/8 in ft
2
ft
3
4. Press the button I (F) to switch to standby mode.
Setting a stake-out point
1. Press and hold the settings button (H) for approx. 2 seconds.
2. Briey press the settings button two times. The following is displayed: