Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1553631
Material Safety Data Sheet
6. Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures
6.1.1 For non-emergency personnel
Use suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data
sheet) to prevent any contamination of skin, eyes and personal clothing.
6.1.2 For emergency responders
People shall be provided related to suitable fabric for personal protective clothing.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. lt shall be provided on any environmental precautions to be taken related to
accidental spills and release of the substance or mixture, such as keeping away from drains, surface and ground water.
6.3 Methods and material for containment and cleaning up
lf you spill this chemical, soak up with inert absorbent material, then transfer the dampened material to a suitable container.
Keep the container in suitable, closed containers for disposal. Your contaminated clothing and the absorbent paper should be
sealed in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water so lution. Do
not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been
properly cleaned.
6.4 Reference to other sections
lf appropriate Sections 8 and 13 shall be referred to.
7. Handling And Storage
7.1 Precautions for safe handling
All chemicals should be considered hazardous. Avoid direct physical contact. Do not breathe dust. Do not breathe vapors or
spray mist. Do not eat, drink and smoke in work areas, wash hands after use, remove contaminated clothing and protective
equipment before entering eating areas.
7.2 Conditions for safe storage, including any incompatibilities
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. To maintain product quality, do not store in heat or
direct sunlight. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area.
Protect containers/cylinders from physical damage.
7.3 Specific end use(s)
No information available.
Page 3 of 8