Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1553760
Material Safety Data Sheet
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures:
6.1.1 For non-emergency personnel:
Provide adequate ventilation. Avoid inhalation of dust. Avoid skin and eye contact. Refer to section 8 of SDS for personal
protection details.
6.1.2 For emergency responders:
Wear an appropriate NIOSH/MSHA approved respirator if dust is generated.
6.2 Environmental Precautions:
Avoid disposing into drainage/sewer system or directly into the aquatic environment.
6.3 Methods for Containment and Cleaning up:
Take up mechanically.
6.4 Reference to other sections:
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
6.5 Additional information:
Not applicable.
7. Handling and storage
7.1 Precautions for safe handling:
7.1.1 Protective measures:
Good hygienic practices should be observed. Avoid contact with skin and eyes.
Avoid breathing dust. If exposed to high dust concentration, leave area immediately.
Work clothes should be washed separately at the end of each work day. Keep away from sources of ignition. Ensure good
ventilation/exhaustion at the workplace.
7.1.2 Advice on general occupational hygiene:
Do not eat, drink and smoke in work areas. Wash hands after use. Remove contaminated clothing and protective equipment
before entering eating areas.
7.2 Conditions for safe storage, including any incompatibilities:
Store in a cool, dry, well-ventilated area. Material should be stored in a clean, dry environment in original packaging and not
exposed to ignition sources.
7.3 Specific end use(s):
Not applicable.
Page 3 of 9