User manual

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1561120_1_v1_0118_02_IPL_m_en
Disabling automatic watering
Select the menu item OFF.
HRS
DAY
MIN
ZONE RESET MANUAL
AM
PM
SU FR SATHWETUMO
TODAY
DELAY
NEXT START TIME
WATER DAY EVERY
Delaying automatic watering
If it is supposed to rain, you can delay automatic watering for a xed period. After this
delay, the program continues automatically.
• Select the menu item AUTO.
• Press the + button. The display shows DELAY.
• Press the + or – button to set the duration. You can set 12 hours or 1 to 7 full days.
• To undo this delay, repeatedly press the – button when selecting the duration until the current
time is displayed.
HRS
DAY
MIN
RESET MANUAL
AM
PM
SU FR SATHWETUMO
TODAY
DELAY
NEXT START TIME
WATER DAY EVERY
ZONE
HRS
DAY
MIN
ZONE RESET MANUAL
AM
PM
SU FR SATHWETUMO
TODAY
DELAY
NEXT START TIME
WATER DAY EVERY
Manual watering
Manual watering will not work while automatic watering is delayed (see previous
chapter).
• Press the ON/OFF MANUAL button.
• Set the duration between 1 and 360 minutes with the + or – button.
• Press the OK button to conrm.
HRS
DAY
MIN
RESET MANUAL
AM
PM
SU FR SATHWETUMO
TODAY
DELAY
NEXT START TIME
WATER DAY EVERY
ZONE
Resetting
Press and hold the OK button for 7 seconds to reset the product to the factory settings. All
settings will be lost.
HRS
DAY
MIN
ZONE RESET MANUAL
AM
PM
SU FR SATHWETUMO
TODAY
DELAY
NEXT START TIME
WATER DAY EVERY
HRS
DAY
MIN
ZONE RESET MANUAL
AM
PM
SU FR SATHWETUMO
TODAY
DELAY
NEXT START TIME
WATER DAY EVERY
Storage in winter
• Turn off the tap. Disconnect the product from the water tap.
• To open the valve and allow any remaining water to drain, press the ON/OFF MANUAL
button. Set a duration of 1 minute. Press the OK button to conrm.
• Let the product dry completely.
• Remove the batteries.
• Store the product in a dry place.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product. Use a damp cloth and a mild detergent to
remove tougher stains.
• If necessary, remove lth from the water tap connection.
Disposal
a) Product
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You are required by law to return all used batteries (Battery Directive). They must not
be placed in household waste.
Batteries that contain hazardous substances are labelled with this symbol to indicate
that disposal in domestic waste is forbidden. The abbreviations for heavy metals in
batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (indicated on the battery,
e.g. below the waste icon on the left).
Used batteries can be returned to local collection points, our stores or battery retailers.
You thus full your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................ 2x AA battery
Water pressure ............................. max. 6.89 bar (100 psi)
Operating/storage conditions ........ 0 to +60 °C, 10 – 100 % RH
Dimensions (W x H x D) ............... 135 x 165 x 63 mm