User manual

3. Intended use

When used for its intended purpose, this device corresponds to the state of the art, as well as to the current safety

requirements at the time of its introduction.

The appliance is intended exclusively for non-professional use for dry sanding and cutting of metal and stone materials.

Themachinemustbeoperatedinaccordancewiththespecicationsprovidedintheseinstructions.

The device is not suitable for commercial or industrial use.

Any other type of use is inappropriate.

Improperuseor modicationstothedevice ortheuse ofcomponentsthat are nottestedand approvedbythe

manufacturer may result in unforeseen damage!

Any use that deviates from its intended use and is not included in these instructions is considered unauthorized use

and relieves the manufacturer from his or her legal liability

4. Delivery content

• Angle grinder: 1pc

• Additional hand grip: 1pc

• Hex Key: 1pc

• Grinding guard: 1pc

• Cutting guard: 1pc

• Instruction manual: 1pc

After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.

Up-to-date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code

shown. Follow the instructions on the website.