User manual

26
Tips on use
Risk of injury! Never use cutting discs for abrading.
Risk of injury!The abrading disc and work piece become very hot during use. Let the abrading disc and
work piece cool down completely before touching them.
 Riskofinjury!Alwaysgrindwiththespeciedsurfaces:
 Cuttingdiscs:Peripheralsurface;Grindingdisc,grindingwheel:Sidesurface.
• Alwaysclamptheworkpiecermly.
• Never tilt the appliance when cutting materials.
• Never apply excess pressure to the appliance.
8. Troubleshooting
By purchasing this angle grinder, you have acquired a product design to the state of the art and operationally reliable.
Nevertheless, problems or errors may occur.
The following contains description for the removal of possible interference.
Always observe all safety information in these operating instructions.
Problem Solution aid
Appliance is not running.
• Check the cable, plug, socket and the fuse.
• Contact your local market.
Insufcientperformance.
• Fit a suitable abrading disc.
• Fitting the abrading disc.