Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1586229
Material Safety Data Sheet
8. Exposure Controls/Personal Protection
8.1 Control parameters:
8.1.1 Occupational exposure limits:
Paraffin wax (CAS# 8002-74-2):
Occupational Exposure Limit Value (8-hour reference period): 2 mg/m3
Occupational Exposure Limit Value (15-minute reference period): 6 mg/m3 (Ireland)
8.1.2 Additional exposure limits under the conditions of use:
Not available.
8.1.3 DNEL/DMEL and PNEC-Values:
Not available.
8.2 Exposure controls:
8.2.1 Appropriate engineering controls:
Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. If user operations generate dust, fumes or mist, use ventilation to
keep exposure to airborne contaminants below the exposure limit.
8.2.2 Individual protection measures, such as personal protective equipment:
Eye/face protection: Wear safety glasses with side shields or vented safety goggles.
Hand protection: Appropriate protective gloves should be worn as necessary.
Body protection: Wear easily washable clothing. Wash clothing after each shift.
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards: Wear suitable protective clothing to prevent heat.
8.2.3 Environmental exposure controls:
Avoid discharge into the environment.
According to local regulations, Federal and official regulations
Page 4 of 9