Instructions

27
c) Protective cover
• Secure the protective cover (6) in place using the 3 screws (ST4 x 12) on the motor housing.
• Theedgesoftheprotectivecover(6)musttintothecorrespondingslotsonthemotorhousing.
d) Brush
• The brush (7) is locked in place with a quick-locking mechanism on the motor axis.
• Press the quick-locking mechanism on the motor axis in the direction of the motor housing.
• Insert the hexagonal shaft on the brush (7) into the slot on the motor housing.
• Release the quick-locking mechanism. The brush (7) will lock automatically.
 Thebrush(7)mustbepressedrmlyinthedirectionofthemotorhousingtoensurethatitclicksintoplace.
The quick-locking mechanism must lock the brush (7) in place. Do not switch on the weed sweeper if you
are not sure that the brush is locked.
e) Adjusting the shaft
• Loosen the shaft lock by turning it in the direction of the open lock symbol.
• Extend the shaft to the desired length.
• Secure the shaft lock (5) by turning it in the direction of the closed lock symbol.
• The shaft can be rotated by 180°.
• To do so, pull the rotation lock (4) upwards, and then turn the shaft by 180°
 Therotationlockmustclickbackintoplacewhenyouhavenishedrotatingtheshaft.