Instruction Manual

b) Take Photo

• Adjust the microscope so that the camera lens (A7) is close to and pointing at the object.

• Make sure the object to be examined is centered under the lens.

• While observing the image preview area (B4), bring the image into focus.

• To capture the image select the camera shortcut

icon, or press the snapshot button.

• Photos will be stored in File > Photos Folder.

Captured images show as thumbnails in the saved images window (B7). If you hover the mouse over a

thumbnail, the image will show in the preview window. Images are stored in the JPG format.

c) Record Videos

• Adjust the microscope so that the camera lens (A7) is close to and pointing at the object.

• Make sure the object to be examined is centered under the lens.

• While observing the image preview area (B4), bring the image into focus.

• To start recording click on the Video shortcut

.Theiconwillashtoindicaterecordinghasstarted.

• Clicktheashingicontostoprecording.

• Videos will be stored in File > Videos Folder.

Captured videos show as thumbnails in the saved images window (B7). If you hover the mouse over a

thumbnail, the image will show in the preview window. Videos are stored in the AVI format.

d) Photo and Video Timer

• You can set a custom start and stop timer for capturing photos or recording

video.

• Select the Timer shortcut

, then choose Photo or Video.

• Set your desired parameters.

• Select Start, to begin recording.

 Recordingwillstopaftertheprogramhasrunthroughtheparameters,

or if you select Stop to end the timer.