Instructions

63
Alternating voltage (V/AC) LoZ
Range Resolution Accuracy
4.000 V 0.001 V
±(2.3% + 7)
40.00 V 0.01 V
400.0 V 0.1 V
600 V 1 V
Speciedmeasuringrange:5–100%ofthemeasuringrange
Frequencyrange:45–400Hz;600Voverloadprotection;Impedance:10MΩ(mV:≤1000MΩ)
The multimeter may display 10 counts if a measuring input is short-circuited.
After using the LoZ feature, leave the multimeter for 1 minute before using it again.
TrueRMSpeak(CrestFactor(CF))≤3CFto600V
TrueRMS peak for non-sinusoidal signals plus tolerance
CF >1.0 - 2.0 + 3%
CF >2.0 - 2.5 + 5%
CF >2.5 - 3.0 + 7%
Direct current (A/DC)
Range Resolution Accuracy
400.0 µA 0.1 µA
±(1.0% + 7)
4000 µA 1 µA
40.00 mA 0.01 mA
400.0 mA 0.1 mA
4.000 A 0.001 A ±(1.3% + 6)
10.00 A 0.01 A ±(1.6% + 7)
600 V overload protection
Fuses: µA/mA = 3x 160 mA resettable PTC fuses
10 A = High-performance FF12AH1000V ceramic fuse
≤6A=continuousmeasurement,>6A=max.10secsatintervalsof15minutes
The multimeter may display 3 counts when a measuring input is open