Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 886594
Material Safety Data Sheet
according to Regulation (EC) No 1907/2006
8. Exposure controls/personal protection
8.1. Control parameters
-
8.2. Exposure controls
Protective and hygiene measures
Keep away from food, drink and animal feed.
Immediately remove soiled, soaked clothing.
Wash hands before breaks and at the end of work.
Avoid contact with eyes and skin.
Eye/face protection
Sealed safety goggles
Hand protection
Only use chemical protective gloves with a category III CE marking. In order to minimise wetness in the glove due to
perspiration, it is necessary for the gloves to waft during one shift. Before each new use of the glove the tightness must be
checked. Preventive skin protection through the use of skin protection products is recommended.
Glove material: nitrile rubber, fluororubber (Viton)
Recommended material thickness: >= 0,5mm
Skin protection
Work protective clothing
Respiratory protection
Respiratory protection in case of insufficient ventilation. Recommended filter unit for short-term use: Combination filter A-P2
Page 6 of 15