Safety data sheet

Version No.: 1.0
Revision No.: 1.0
Revision date: 13/10/2011
Page 4/9
TOOLCRAFT EPOXY 5 Min., hardener
Safety Data Sheet
storage, including any
incompatibilities
Requirements for storage rooms and containers: Store only in original
container.
Common storage: Store away from acids and oxidizing agents
Additional information to storage conditions: Store containers in a
well ventilated place. Keep containers tightly closed. Protect from
heat / overheating.
7.3. Specific end use(s) Not determined.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control Parameters
Ingredients with limit values that require monitoring at the workplace :
NOT RELEVANT
8.2. Exposure controls
Appropriate engineering
controls
Ensure adequate ventilation in the workplace.
Personal protective
equipment
Respiratory protection: inapplicable
Hand protection: Butyl rubber, > 120 min (EN 374)
The details concerned are recommendations . For more detailed
information please contact the gloves manufacturer.
Eye protection: protections goggles.
Body protection: inapplicable
Hygiene measures: Do not eat, drink, smoke or take drugs at the place
of work. Wash hands before breaks and after work. Use preventive
skin protection cream for skin protection.
General safeguards measures: Avoid contact with eyes and skin. Do
not inhale vapours.
Personal protective equipment should be selected specifically for the
working place, depending on concentration and quantity of the
hazardous substances handled. The chemical resistance of the
protective equipment should be enquired at the respective supplier.
Environmental exposure
controls
Not determined
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information of basic physical and chemical properties
Physical state viscous
Colour light
Odour mild
Odour threshold inapplicable
pH inapplicable
Melting point / range [°C] inapplicable
Boiling point /range [°C] 204
Flash point [°C] >188