Safety data sheet

Version: 1.0
Revision: 1.0
Revision date: 16/09/2011
Page 4/10
TOOLCRAFT EPOXY STICK ALU
Safety data sheet
6. ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions,
protective equipment and
emergency procedures
Particular danger of slipping on leaked / spilled product.
6.2. Environmental
precautions
Do not discharge into drains / surface water / groundwater.
6.3. Methods and material
for containment and
cleaning up
Pick-up mechanically.
Dispose of the material in accordance with regulations.
6.4. Reference to other
sections
Safe handling: see section 7
Disposal: see section 13
Personal protective equipment: see section 8
7. HANDLING AND STORAGE
7.1. Precautions for safe
handling
No special measures required if used correctly.
7.2. Conditions for safe
storage, including any
incompatibilities
Precautions against fire and explosion: No special measures required.
Requirements for storage rooms and containers: Keep in original
container.
Common storage: Do not store with oxidizing agents.
Further information: Keep container tightly closed. Store container in
a well ventilated place. Store in a cool place.
7.3. Specific end use(s) Unavailable.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Components with critical values that require monitoring at the workplace: (DE)
Content[%] Component / occupational exposure limit
1 - < 10 Aluminium powder (not stabilized) / -ppm, -mg/m³, BAT
8.2. Exposure controls
Appropriate engineering
controls
Provide adequate ventilation in the workplace.
Personal protective
equipment
Respiratory protection: not relevant
Hand protection: Butyl rubber, >120 min (EN 374).
The details are recommendation. For further information, please
contact the glove supplier.
Eye protection: Protective goggles.
Body protection: Light protective clothing of plastic.
Hygiene measures
: When using do not eat, drink or take drugs.
Wash hands before breaks and after work. Remove contaminated