Datasheet

Threadlocker

Protective Lacquer for Screws

TOOLCRAFT Protective Lacquer for Screws is a conventional lacquer used for securing and identification.

Gebinde

50 ml tube

Art.-Nr.:

888635

Application Areas

Soluble protection to guard against unknown inter

ference, to cover electrically conductive parts, to protect against corrosion, and to protect against

interference by contact.

Instructions

The surfaces have to be dry and free of grease and dust. The temperature of the material should not fall below 18°C. The

coated surface or component can be immediately processed.

Physical Properties

Good adhesion on many materials. Performance: Tensile stress strength < adhesion force torque; low

dielectricity und high insulation resistance.

Viscosity:

200s / 8 mm / 20°C

Airing time: > 10 seconds at 20°C depending on layer thickness

Processing temperature: + 18°C to 30°C

Temperature range: - 40°C up to + 80°C

Colours: red

PAGE 1
Threadlocker Protective Lacquer for Screws TOOLCRAFT Protective Lacquer for Screws is a conventional lacquer used for securing and identification. Gebinde 50 ml tube Art.-Nr.: 888635 Application Areas Soluble protection to guard against unknown interference, to cover electrically conductive parts, to protect against corrosion, and to protect again interference by contact. Instructions The surfaces have to be dry and free of grease and dust. The temperature of the material should not fall below 18°C.