User manual

OPERATING INSTRUCTIONS
Version 07/11
Workshop Tool Wagon
Item no. 89 06 74 WSW-407
Item no. 89 06 80 WSW-305
Intended use1.
The high quality, perfect construction and a sophisticated design distinguish this industrial workshop tool wagon
with 7 drawers (WSW-407) / 5 drawers (WSW-305). The workshop tool wagon is equipped with a drawer latch
when closed. Only one drawer can be opened at a time. All drawers are attached using ball bearing mounted
guide rails. They can be locked using a central locking device with a cylinder lock (2 keys included in delivery).
Each drawer is already lined with a mat. All painted parts are powder-coated. The subtle colours enable this
workshoptoolwagontooptimallytintoitssurroundings.
For safety purposes, you must not rebuild and/or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
Safety instructions2.
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
The device is not a toy. Keep it out of the reach of children and pets.•
Do not leave packaging material lying around carelessly. These may become dangerous playing material •
for children.
If it is no longer possible to operate the product safely, take it out of operation and protect it from any •
accidental use. Safe operation can no longer be guaranteed if the product:
is visibly damaged, -
is no longer working properly, -
has been stored for extended periods in poor ambient conditions or -
has been subjected to any serious transport-related stresses. -
Miscellaneous
Maintenance, modications and repairs are to be performed exclusively by an expert or at a qualied•
shop.
If you have questions which remain unanswered by these operating instructions, contact our technical •
support service or other technical personnel.
Components3.
WSW-407
A
C B
A = Side handle
B = Swivel castors
C = Fixed castors
WSW-305
A
C B
A = Side handle
B = Swivel castors
C = Fixed castors
Installation4.
Thereare2swivelandtwoxedcastorsinthedeliverycontent.•
Fasten the roles with screws to the underside of the wagon.•
Make sure to mount only 2 roles of the same type per axis.•
Disposal5.
When the instrument has become unusable, dispose of it in accordance with the current
statutory regulations.
Technical data6.
Model: WSW-407 WSW-305
Height: 1000 mm 845 mm
Width: 722 mm 677 mm
Depth: 459 mm 459 mm
Weight: 66.2 kg 52.8 kg
Maximum weight capacity per drawer: 40 kg
Colour: Grey / anthracite / red
Optional accessories: WKZ-309 Small parts tool box (item no. 887090)
Drawer tray 15 pcs. (item no. 890671)
Drawer tray 4 pcs. (item no. 890673)
Storage shelf (item no. 890675)
Universal storage box (item no. 890676)
Paper roll holder (item no. 890678)
Storage shelf (item no. 890679)
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g. photocopy,
microlming,orthecaptureinelectronicdataprocessingsystemsrequirethepriorwritten
approval by the editor. Reprinting, also in part, is prohibited.
Theoperatinginstructionsreectthecurrenttechnicalspecicationsattimeofprint.
Wereservetherighttochangethetechnicalorphysicalspecications.
© 2011 by Conrad Electronic SE.
V2_0711_02-SB