Safety data sheet

ManualsBrandsTOOLCRAFT ManualsCare Products12 pc(s)

Toolcraft

SILICONE SPRAY 400 ML

Safety Data Sheet

IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY

UNDERTAKING

1.1.

Product identifier:

Product name /

Designation

Chemical

Designation

CAS number

EC number

Index number

REACH number

1.2.

Relevant identified uses of the glue and uses adv

Relevant identified

uses

Lubricant

Uses advised against

not defined

1.3.

Details of the supplier of the safety data sheet

Name

Conrad Electronic SE

Address

Klaus

92240 Hirschau / DEUTSCHLAND

Telephone

+49 (

Fax

+49 (0)

Contact email

quality

SDS contact email

tox@ecomundo.eu

1.4.

Emergency telephone number

Telephone

+49 (0) 89

HAZARDS IDENTIFICATION

2.1.

Classification of the substance or mixture

2.1.1.

Classification of the substance according to DSD (67/548/EWG)

F+; EXTREMELY

FLAMMABLE

R 12

R 52/53

effects in the aquatic environment.

2.1.2.

Classification of the substance according to CLP (1272/2008/EC)

Flam. Gas 1 Press

gas

Aquatic Chronic 3

H220 Extrem

H412

2.2. Label Elements

Hazard pictograms

Revision date: 15/11/2011

SILICONE SPRAY 400 ML

IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY

raft

Silicone spray 400

Relevant identified uses of the glue and uses adv

ised against

Lubricant

not defined

Details of the supplier of the safety data sheet

Conrad Electronic SE

Klaus

-Conrad-Str. 1

92240 Hirschau / DEUTSCHLAND

+49 (

0) 180-5312111

+49 (0)

180-5312110

quality

-control@conrad.de

tox@ecomundo.eu

Emergency telephone number

+49 (0) 89

-19240 (24h)

HAZARDS IDENTIFICATION

Classification of the substance or mixture

Classification of the substance according to DSD (67/548/EWG)

R 12

Extremely flammable.

R 52/53

Harmful to aquatic

organisms, may cause long

effects in the aquatic environment.

Classification of the substance according to CLP (1272/2008/EC)

H220 Extrem

ely flammable gas.

H412

Harmful to aquatic life with

long lasting effects.

Version No.: 1.0

Revision No.: 1.0

Revision date: 15/11/2011

Page 1/10

IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY

organisms, may cause long

-term adverse

long lasting effects.

Summary of content (10 pages)

PAGE 1
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 1/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet 1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY UNDERTAKING 1.1. Product identifier: Product name / Designation Chemical Designation CAS number EC number Index number REACH number T Toolcraft Silicone spray 400 ml - 1.2. Relevant identified uses of the glue and uses advised adv against Relevant identified Lubricant uses Uses advised against not defined 1.3.
PAGE 2
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 2/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet Risk phrases Safety advices Special designation of certain mixtures F+ – Extremely flammable R 12 Extremely flammable. R 52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. S 23 Do not inhale aerosol. S 51 Use only in well-ventilated area. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C.
PAGE 3
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 3/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet (2) Annotation U: Before distribution gases as „gases under pressure“ have to be classified into the group of condensed gases, liquefied gases to deep-frozen or solute gases. The categorisation to a group depends on the physical state in which the gas is packed. The gas has to be categorized each single time.
PAGE 4
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 4/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet precautions, protective equipment and emergency procedures 6.2. Environmental precautions 6.3. Methods and material for containment and cleaning up 6.4. Reference to other sections Provide adequate ventilation. Do not allow to enter sewers/surface or ground water. Pick up mechanically. Condense using liquid-binding material (e.g. sand) Dispose of the condensed material properly.
PAGE 5
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 5/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet Limits and monitoring of environment controls at the place of work. Be sure to clean skin thoroughly after work and before breaks. Prohibition of food storage in the place of work. Preventive skin protection by skin salve. General protection measures: Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols.
PAGE 6
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 6/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet 10.1. Reactivity 10.2. Chemical stability 10.3. Possibility of hazardous reactions 10.4. Conditions to avoid 10.5. Incompatible materials 10.6. Hazardous decomposition products Not defined. not defined Risk of bursting. Evolution of flammable mixtures possible in air when heated above flash point and/or during spraying or misting. See section 7.2. not defined Flammable gases/vapours.
PAGE 7
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 7/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet 13. DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Dispose according to 75/442/EWG and 91/689/EWG directives. 13.2. Waste code numbers / waste identification 13.2.1. Product Dispose of as hazardous waste. 13.2.2. Contaminated Packaging that are not contaminated may be recycled. packaging 13.2.3. AAV-No.
PAGE 8
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 8/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet 14.11. Special precautions for user See section 6 – 8. 14.12. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code not defined 15. REGULATORY INFORMATION 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture 15.2.
PAGE 9
Version No.: 1.0 Revision No.: 1.0 Revision date: 15/11/2011 Page 9/10 Toolcraft SILICONE SPRAY 400 ML Safety Data Sheet AOX = adsorbierbare organische Halogenverbindungen CAS Nr.: Chemical Abstract Service Number CLP: Classification, Labelling and Packaging (Einstufung, Kennzeichnung und Verpackung) DSD: Dangerous Substance Directive (Stoffrichtlinie) DPD : Dangerous Preparation Directive (Zubereitungsrichtlinie) EG Nr.
PAGE 10
Version No.: 1.0 Revision No.: 1.