Safety data sheet

Version No.: 1.0
Revision No.: 1.0
Revision date: 15/11/2011
Page 5/10
Toolcraft SILICONE SPRAY 400 ML
Safety Data Sheet
at the place of work. Be sure to clean skin thoroughly after work
and before breaks. Prohibition of food storage in the place of
work. Preventive skin protection by skin salve.
General protection measures: Avoid contact with eyes and skin.
Do not inhale gases/vapours/aerosols. Personal protective
equipment should be selected specifically for the working place,
depending on concentration and quantity of the hazardous
substances handled. The chemical resistance of the protective
equipment should be enquired at the respective supplier.
Limits and monitoring of
environment controls
See section 6 and 7.
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1.
Information on basic physical and chemical properties
Physical state aerosol
Colour Colourless
Odour characteristic
Odour threshold not defined
pH-Value not applicable
pH-Value [1%] not applicable
Evaporation rate not applicable
Melting point / range [°C] not applicable
Boiling point /range [°C] not applicable
Flashpoint [°C] not applicable
Flammability [°C] not defined
Upper/lower flammability or
explosive limits
not defined
Vapour pressure not applicable
Vapour density not applicable
Density [g/ml] 0,58 (20°C / 68,0°F)
Bulk density [kg/m³] not applicable
Solubility in Water (g/l) Almost not soluble
Other Solvents not defined
Partition coefficient (n-
octanol/Water)
not defined
Auto-flammability
temperature [°C]
not applicable
Decomposition temperature
[°C]
not applicable
Viscosity not applicable
Explosions hazards not defined
Oxidising properties no
9.2. Additional information
none
10. STABILITY AND REACTIVITY