Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 887253
Material Safety Data Sheet
8. Exposure controls/personal protection
8.1. Control parameters
Exposure limits:
No information available
8.2. Exposure controls
Control procedures:
Ensure adequate ventilation
Keep away from heat and sources of ignition
Personal protection:
Take precautions to avoid contact with skin and eyes when handling the product.
Ensure adequate ventilation
Inhalation:
In case of insufficient ventilation, wear suitable respiratory equipment.
Compressed air mask.
Recommended respiratory protection: (compressed air)
Hands and skin:
For incidental contact with the product wear chemical-resistant gloves (standard EN 374). The use of disposable gloves is
acceptable provided that they are changed immediately after a splash or spill.
In all cases handle and use the product in accordance with good industrial hygiene practices.
Recommended gloves: (VITON)
Eyes:
Wear safety eyewear according to EN 166.
Environmental protection:
Avoid release to the environment.
Consumer exposure protection:
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
IF exposed or if you feel unwell: Call a POISON CENTER or doctor/physician.
Page 5 of 10