Operating Instructions Laser Rangefinder Item No. 1600019 (LDM X100) Item No.
Table of contents Page 1. Introduction.................................................................... 4 2. Explanation of symbols................................................. 4 3. Intended use.................................................................. 5 4. Package contents.......................................................... 6 5. Features and functions.................................................. 6 6. Safety instructions.........................................................
22. Adding/subtracting....................................................... 25 23. Camera (only LDM X100)............................................ 26 24. Data export (only LDM X100)...................................... 27 25. Tips and useful information......................................... 28 26. Troubleshooting........................................................... 28 27. Care and cleaning....................................................... 29 28. Declaration of Conformity (DOC)...........
1. Introduction Dear customer, Thank you for purchasing this product. This product complies with statutory national and European regulations. To ensure that the product remains in this state and to guarantee safe operation, always follow the instructions in this manual. These operating instructions are part of this product. They contain important information on setting up and using the product. Do not give this product to a third party without the operating instructions.
3. Intended use The product is used for the measurement of distances, surfaces and volumes. Allows addition and subtraction of readings. Calculates height based on the Pythagorean Theorem. The product can be connected via Bluetooth with a smartphone app. The app allows you to edit and evaluate the measured data. This product can also be controlled via the app. For safety and approval purposes, you must not rebuild and/ or modify this product.
4. Package contents • Laser rangefinder • USB charging cable • Storage pouch • Hand strap • 3x rechargeable battery (NiMH, 900 mAh) • Operating instructions The manual for the app is available for download as a separate document. Refer to the following paragraph. Up-to-date operating instructions To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR code on this page. Follow the instructions on the website. 5.
• Automatic shut-off after 3 minutes • Digital water level • Touchscreen • Bluetooth function for connection to a smartphone app • Camera for targeting (only LDM X100) 6. Safety instructions Read the operating instructions and safety information carefully. If you do not follow the safety information and information on proper handling in these operating instruction, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. Safe operation can no longer be guaranteed if the product: -- is visibly damaged, -- is no longer working properly, -- has been stored for extended periods in poor ambient conditions or -- has been subjected to any serious transport-related stress. • Always observe the safety and operating instructions of any other devices which are connected to the product.
• Never look into the laser beam and never point it at people or animals. Laser radiation can seriously damage your eyes. • If laser radiation enters your eyes, close your eyes immediately and move your head away from the beam. • If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety implications, such as working with machines, working from great heights or close to high voltage. Do not drive any vehicles until the irritation has completely subsided.
c) Batteries • Ensure that you insert the batteries in the correct polarity. • To prevent battery leakage, remove the batteries when you do not plan to use the product for an extended period. Leaking or damaged batteries may cause acid burns if they come into contact with your skin. Always use suitable protective gloves when handling damaged batteries. • Batteries must be kept out of the reach of children. Do not leave batteries lying around, as there is a risk that children or pets may swallow them.
7.
7 10 8 9 7 8 Battery compartment cover Tripod thread 9 Charging port 10 Eyelet for hand strap 8.
Example: indirect measurement with two reference points A Measurement reference E Angle B Bluetooth F Measurement mode C Digital water level G Measurement reading D Battery condition b) Measurement reading H I J K L Example: Volume measurement H Measurement mode K Third line segment I First line segment L Volume J Second line segment 9. Inserting (rechargeable) batteries Delivery includes 3 rechargeable batteries. The product can also be operated with conventional batteries.
• Slide the battery compartment cover down. • Remove the battery compartment cover. If you have difficulty removing the battery compartment cover, use a tool to help (e.g. slotted screwdriver). • Insert 3 AAA batteries or rechargeable batteries with correct polarity. Pay attention to the polarity markings inside the battery compartment. • Make sure that the sealing ring on the inside of the battery compartment cover is correctly installed. • Replace the battery compartment cover.
Replace batteries or recharge the rechargeable batteries as soon as the battery status display shows an empty battery. 10. Charging the batteries Never attempt to recharge disposable batteries. Danger of explosion! Please fully charge the rechargeable batteries before initial operation. The USB power supply must be able to supply a current of 500 mA. • Turn the cover that covers the charging port 180° to the side. • Connect the product via the included cable with a USB power supply or a computer.
• Disconnect the cable from the product and from the power source as soon as the rechargeable batteries are charged. 11. Switch device/laser on/off • Press and hold the on/off button approx. 1 second to turn on the product. • Briefly press the MEAS button to activate the laser. • Briefly press the on/off button to deactivate the laser. • Press and hold the on/off button for approx. 1 second to turn the device off. The product switches off automatically after 3 minutes of inactivity. 12.
13. Settings Swipe down to access the setup menu. 1 2 3 4 5 6 1 Bluetooth 4 Digital water level 2 Unit 5 Image rotation 3 Measurement reference 6 Memory Bluetooth • To connect the device with the app, Bluetooth must be enabled. • Tap the icon to activate/deactivate Bluetooth. • If the letter A appears next to the icon, the measured data is automatically sent to the app. • If the letter M appears next to the icon, the measured data can manually be sent to the app.
Unit The following units are available: • m = meters • in = inch • ft = foot • ---’--” = feet/inches Measurement reference The following measurement references are available: Starting point: Back The length of the device is included in the measured value. Starting point: Tripod thread Starting point: Front Digital water level The water level helps you to precisely align the product.
Image rotation • If the symbol is displayed on a white background, rotate the display by turning the product. • If the icon is displayed on a grey background, image rotation is disabled. Memory • Press the MEAS button or swipe left/right to display the stored measured values. • Only LDM X100: To delete the displayed measured value, press the camera button. The last measurement results will be stored automatically. 14. Distance measurement • Press the MEAS button to activate the laser.
• The display shows the maximum, minimum and the last registered measured value of the measurement process. • To exit continuous measurement mode, press the MEAS or the on/off button. • After 5 minutes of inactivity, this feature is automatically deactivated. 16. Area measurement • Swipe right and select the following function: • Measure the two sides of the area. • The device automatically multiplies the measured values. 17.
• Measure the two sides and the height of the room. • The device automatically multiplies the measured values. 18. Indirect measurement The Pythagorean theorem (a2+b2=c2) can be used to indirectly determine the height of an object. Make sure that the starting point for the individual measurements is exactly the same position.
• Now measure the two required line segments. Please see the previous figure for the right order. • The height is calculated automatically and will appear in the bottom row. b) With three reference points - Variant A • Swipe right and select the following function: • Now measure the three required line segments. Please see the previous figure for the right order. • The height is calculated automatically and will appear in the bottom row.
c) With three reference points - Variant B • Swipe right and select the following function: • Now measure the three required line segments. Please see the previous figure for the right order. • The partial height between points 1 + 2 is automatically calculated and displayed in the bottom line. 19.
• Now measure the necessary line segment (see the previous figure). • The result is calculated automatically. 20. Automatic height calculation • Swipe right and select the following function: • Now measure the two required line segments. Please see the previous figure for the right order. • The height is calculated automatically and will appear in the bottom row. 21.
• A warning message appears on the display. The device calibrates. Do not move the device during this time. Wait until the warning message disappears. If self-calibration fails, the list of all measurement modes is shown again. Repeat the procedure in this case. • Now measure the two required line segments. Please see the previous figure for the right order. • The distance is calculated automatically and will appear in the bottom line. 22. Adding/subtracting • Measure the first segment.
• Tap + to add or – to subtract. • Measure the next line segment. • The sum or difference will be shown in the bottom row. This process can be repeated as often as desired. You can also add/subtract areas or volumes. 23. Camera (only LDM X100) Instead of the target laser, you can use the built-in camera to target the measuring point. • Press the camera button if desired before a measurement. The camera image and a crosshair appear on the display.
• Press the camera button again to switch between twoand four-time magnification. The magnification factor is shown in the top right of the display. • Once you have targeted the measuring point, make your measurements as usual. Any ongoing measurement (e.g. volume measurement) is not affected. Previously registered values are retained in the buffer. 24. Data export (only LDM X100) As soon as the product is connected to a computer, the charging process starts.
25. Tips and useful information • Measuring errors may occur when operating the product outdoors due to light refraction or sunlight. Perform measurements in suitable light conditions. • Due to their physical properties, the following surfaces may falsify the measurements: -- Transparent surfaces (e.g. glass, water) -- Reflective surfaces (e.g. glass, shiny metal) -- Porous surfaces (e.g. insulating materials) -- Structured surfaces (e.g.
Code Cause Solution 261 Outside of the measurement range Observe the measuring range. Hardware error Turn the device off and then on again. If after several attempts the error message still appears, contact your retailer. 500 27. Care and cleaning Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the casing or cause the product to malfunction. Do not immerse the product in water or other liquids. • The product is maintenance-free.
28. Declaration of Conformity (DOC) Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product conforms to Directive 2014/53/EU. Click on the following link to read the full text of the EU Declaration of Conformity: www.conrad.com/ downloads Select a language by clicking on the corresponding flag symbol and then enter the product order number in the search box. The EU Declaration of Conformity is available for download in PDF format. 29.
b) Batteries You are required by law (Battery Directive) to return all used batteries. Batteries must not be placed in household waste. Batteries containing hazardous substances are labelled with this symbol to indicate that disposal in household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (indicated on the battery, e.g. below the trash icon on the left).
Memory............................................ 100 (LDM X100) 30 (LDM X80) Operating conditions........................-10 to +40 °C Storage conditions...........................-20 to +60 °C Dimensions (L x W x H)...................115 x 49 x 26 mm Weight.............................................
This is a publication by Conrad Electronic SE, Klaus-ConradStr. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing. Copyright 2018 by Conrad Electronic SE.
