Instructions

Image rotation
• If the symbol is displayed on a white background, rotate
the display by turning the product.
• If the icon is displayed on a grey background, image
rotation is disabled.
Memory
• Press the MEAS button or swipe left/right to display the
stored measured values.
• Only LDM X100: To delete the displayed measured value,
press the camera button.
The last measurement results will be stored
automatically.
14. Distance measurement
• Press the MEAS button to activate the laser.
• Point the laser point at the target at a right angle and try to
hold the device as calm as possible
• Press the MEAS button. After a short time, a beep signal
sounds and the measured value is displayed on the
display.
15. Continuous measurement
• Press and hold the MEAS button for approx. one second
to switch to continuous measurement mode.
• The laser is activated. The distance is now measured
continuously.
19