Instructions

• Press the camera button again to switch between two-

and four-time magnication.

The magnication factor is shown in the top right of the

display.

• Once you have targeted the measuring point, make your

measurements as usual.

Any ongoing measurement (e.g. volume

measurement) is not affected. Previously

registered values are retained in the buffer.

24. Data export (only LDM X100)

As soon as the product is connected to a computer,

the charging process starts.

If you operate the product with conventional,

non-rechargeable batteries, remove them before

connecting the product to a computer.

• Connect the product with the included cable to your

computer.

The product is shown as a drive with the name “Laser-

Meter".

• On the drive, there is a le named “DISTANCE.CSV".

Copy the le in your desired directory.

• Safely eject the product via the operating system before

you disconnect the cable.