Instructions

By default, the measured value is measured from

the back of the device.

c) Unit

BrieypresstheUnit button to change the unit. The following

units are available:

• m = meters

• ft = foot

• in = inch

• ---’--” = feet/inches

13. Making measurements

Measurements can only be performed when the

laser is turned on.

• Press the MEAS button to activate the laser.

• If the target laser is enabled, press the MEAS button to

make a measurement.

• Press the C button to delete a value during the

measurement process.

14. Distance measurement

• Point the laser point at the target at a right angle and try to

hold the device as calm as possible.

• Press the MEAS button. After a short time, a beep signal

sounds and the measured value is displayed on the

display.