Manualshelf

User manual

ManualsBrandsTOOLCRAFT ManualsSoldering StationsHF soldering station Digital 150 W ST-150 HF 50 up to 480 °C + soldering tip
31323334353637383940
33
• Dependingontheworkpieceorsolderingmethod,theworkpiecemustbexedinplacewithasuitable
clamping device. This enables you to use both hands for the soldering process.
• Keep your workstation clean.
• Ensurethatthereissufcientlighting.
• Ensurethatthereissufcientventilationwhensoldering.Solderanduxvapourscanbeharmfultoyour
health.
• Wash your hands thoroughly after working with leaded solder.
• Do not put solder into your mouth or eat or drink during the soldering process.
• Wear suitable protective clothing and safety goggles when soldering. Liquid/splashing solder may cause
serious burns or eye damage.
• Neverusesolderingux,acidorsimilaraidswhensoldering.Thesematerialscancausebadsoldering
jointsandmaydamagethesolderingtip.Forbestresults,useasolderwirewithauxcore.
• When using the soldering iron, do not touch any other part of the soldering iron apart from the handle.
Burn hazard! The entire front part of the soldering iron gets very hot during use (and during the heating
and cooling process). Always hold the soldering iron using the handle to avoid burning yourself.
• Alwayssolderonnon-ammablesurfaces.Ensurethattherearenoneighbouringmaterialsthatmaybe
damaged by the heat generated from the soldering iron.
• Only use the product in temperate climates. It is not suitable for use in tropical climates. Refer to the
“Technical data” section for information on the permitted ambient conditions.
• Never use the product immediately after it has been brought from a cold room into a warm one. This may
generate condensation, which can cause the product to malfunction or damage the interior components.
Moisture on the soldering station, mains cable or power adapter may also cause a fatal electric shock!
Allow the product to reach room temperature before using it. This may take several hours.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized use. Safe
operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.