Instructions

28
# Description # Description
1 Motor housing 27 Spring pin (2x4)
2 Spring pin (2x24) 28 Hammer case
3 Air inlet 29 O-Ring (43x1.5)
4 Trigger 30 Gasket
5 O-Ring (4x1) 31 Gasket
6 Reverse valve 32 Washer
7 Exhaust diffuser 33 Hammer cage
9 Forward button 34 Hammer (x2)
10 Reverse button 35 Hammer pin (x2) (6.3x51.5)
11 O-Ring (2x17.5) 36 Anvil (1/2”)
12 Retaining ring (RTW-17) 37 O-Ring (6.5x2)
13 Ball bearing (6001zz) 38 Retaining ring
15 Rotor 39 O-Ring (15.5x2.75)
16 Rotor blade (6pcs) 41 O-Ring (x3) (15.54x2.62)
17 Spring pin (2.5x5) 42 Valve spring
18 Cylinder 43 Valve Stem
19 Front end plate 44 Rubber spacer
20 Ball bearing (EE4) 45 Spring pin (2.5x22)
21 Air regulator 46 Screw (x4) (M4x90L)
22 O-Ring (34.65x1.78) 47 Mufer material
23 Spring 48 Mufer material
24 Steel ball 2pcs (9/64”) 58 Partition
25 Anvil bushing 59 Screw (TS2.2x10L)
26 Oil cap (1/8”)