User manual

Controls
4
3
1
2
1 Handleswithintegratedmechanismforthetransmissionandautomaticlock
2 Releaselevertoreleasetheautomaticlockafteranincorrectcrimping
3 Toothedwheeltoadjustthetorque(withlockingscrew)
4 Insertpair
Replacing the insert pairs
Thereareatotalof3insertpairsinthepackage(oneofthemisalreadyinsertedinthecrimppliers.
Bothpartsoftheinsertpairarelabledrespectivelywith“A”,“D”or“F”.
Toremoveaninsertpairfromthecrimppliers,openthecrimppliersandthensimplypullthetwoparts
oftheinsertpairforwardandout.Afterwards,inserttheotherdesiredinsertpairfullyintothecrimp
pliersuntilitclicksintoplace.
Payattentionthatyoualwaysinsertthetwomatchingpartsofaninsertpairintothecrimp
pliers(whichhavethesamelabelling,e.g.“A”,“D”or“F”).Otherwise,youwon’tbeableto
carryoutthecrimpingcorrectly,andyouruntheriskofdamagingthecrimppliersorthe
inserts.
Crimping process
Dependingontheavailablecrimp-typeconnector,selectthesuitableinsertpairforthecrimppliersand
insertthecrimp-typeconnectorintothecorrectopening.
Pressthehandles(1)ofthecrimppliersrmlytogether.Thetransmissionmechanisminthehandle
causesanincreaseofthetorque.
Ifthetorqueselectedviathetoothedwheel(3)isattained,theforcedlockandthusthehandlesare
automaticallyreleasedandthecrimp-typeconnectorcanberemoved.
Adjusting the torque
First,unscrewthelockingscrewofthetoothedwheel(3)completely.
Inthisprocess,thecrimppliersmustnotbepressedtogether;rather,
thehandleshavetobefullyopen.
Movethetoothedwheelinthe“-”directiontodecreasethetorqueor
inthe“+”directiontoincreasethetorque.
Secure the toothed wheel (3) again with the screw that you un-
screwedatthebeginning(underthetoothedwheeltherearethree
threads(seecircleintheimagetotheright)sothattheadjustmentof
thetorqueinatotalof18stagesispossible).
Releasing the automatic lock via the release lever
Intheeventofawrongcrimping,theautomaticlockofthecrimpplierscanbereleasedbeforecomplet-
ingtheprocessbypushingthereleaselever(2)towardthefrontside(inserts).
Afterwards,thehandlescanbemovedapartandyoucanremovethefaultycrimp-typeconnector.
Maintenance and cleaning
Theproductdoesnotrequireanymaintenanceandshouldneverbedisassembledforanyreason.
Servicingorrepairmaybecarriedoutonlybyaspecialist.
Cleantheproductonlywithasoft,clean,drycloth.
Technical Data
Dimensions.......................................approx.258x91x19.5mm(LxWxHwithinsert)
Weight..............................................approx.570g(withinsert)
Torqueadjustment............................yes,in18stages
G
O P E R A T I N G I N S T R U C T I O N S
Crimping tool kit, 439 pieces
Item no. 1677726
Intended use
Thecrimppliersareintendedforthecrimpingofcrimp-typeconnectorsthataresuitableforthispur-
pose.Thereplaceableinsertsincludedprovidedifferentoptionsfortheuseandapplicationofthe
product.
Pleasereadtheseoperatinginstructionscarefullytoensuresafeuseandoperationoftheproduct.
Keeptheseoperatinginstructions inasafeplace for futurereference.Alwaysobservethe safety
instructionsandallotherinformationincludedintheseoperatinginstructions.
Anyuseotherthanthatdescribedaboveisnotpermittedandcanleadtodamageofthisproduct;this
canalsoleadtodangerfortheuser.
ThisproductcomplieswiththeapplicablenationalandEuropeanrequirements.Allnamesofcompa-
niesandproductsarethetrademarksoftherespectiveowners.Allrightsreserved.
Package contents
• Crimppliers
• 3replaceableinsertpairs(oneofwhichisalreadyinsertedintothecrimppliers)
• Storage/transportcase
• Numerousdifferentcrimpconnectorsandferrules
• Operatinginstructions
Safety instructions
Damage due to failure to follow these operating instructions will void the warranty!
We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by improp-
er use or non-compliance with the safety instructions! In such cases, the warranty
will be null and void.
•Forsafetyreasons,anyunauthorisedconversionand/ormodicationoftheproductisnot
permitted.
•Theproductisnotatoyanditshouldbekeptoutofthereachofchildren.
•Openthestorage/transportcaseonlywhenitislyingonthecorrectside.Otherwisenot
onlythecrimppliersandtheinserts,butalsoallofthecrimpconnectors/ferruleswillfall
out.
•Checktheproductforanydamagebeforeusingit.Ifyounoticeanydamage,donotuse
theproductanylonger.
•Whenusingtheproduct,observethesafetyandaccidentpreventionregulationsapplica-
bleinyourcountry.
•Donotuseanyleverextension(toreinforcethecrimpingeffectofthecrimppliers).This
willleadtothedamageoftheproduct.Furthermore,thereisariskofinjury.
Thecrimppliersmaybeusedonlyforcrimpingofsuitablecrimp-typeconnectorsand
mustnotbeusedtounscrewnuts,screwsorbolts.
Neverusethecrimppliersasastrikingtool,thiswilldestroyit.
•Duringoperationorstorageofthecrimppliers,protectthecrimppliersandtheinserts
fromhumidity,dustanddirt,oilorchemicals.Alsoneverdropthecrimppliers;theywill
becomedamagedandunusable.
Toprotecttheproduct,usethestorage/transportcaseprovided.
•Inschools,educationalcentres,hobbyandself-helpworkshops,theuseoftheproductis
tobesupervisedbytrainedemployeesinaresponsiblemanner.
•Donotleavethepackagingmaterialcarelesslylyingaround,asitcouldbecomeadan-
gerousplaythingforchildren.
•Ifyouareindoubtabouthowtousetheservicecartcorrectly,orifyouhaveanyques-
tionsnotcoveredbytheseoperatinginstructions,pleasecontactourtechnicalsupportor
anyotherspecialist.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.