User manual

37
a) Camera
• Resolution:Changetheimageresolution.Thehighertheresolutionthemorememoryspaceeachimagetakes.
• Time Lapse:
- Frames: Set the total number of images to be taken.
- Duration: Set the interval between images taken (hh:mm:sec).
- Press
to exit the settings.
- Time lapse will automatically start and the LCD (A19) will show the time lapse icon
.
- Timelapsewillnishafterthetotalnumberofimageshavebeentaken,bypressingOK, or pressing
.
• Sharpness: Software sharpen the image (Hard, Normal, Soft).
b) Video
• Resolution:Switchresolution(VGAorQVGA)
c) General
• Language: Set display language.
• Power Save: Set the auto shut off time if no keys are pressed (5, 10, 15) minutes.
• Frequency:Changetheickerfrequency50Hzor60Hz.
• Date Stamp:
- First go to “Date/Time” and set the current time and date.
- Setting “Date/Time” will apply a date and time stamp to all your photo and video recordings.
• TV Out: Select between PAL or NTSC.
• Date/Time: Set the current date and time.
• Format SD: Erases all images on SD card / prepares new SD card for use.
• Sys.Reset:Restoresallsettingstofactorydefaults.
• Version:Indicatestheinstalledrmwareversion.