Instructions

Operating Instructions
Safety Goggles
Item No. 1781067 / 1781072
Safety Spectacles
Item No. 1781068 / 1781070 / 1781071 / 1763882
Intended Use
This product is intended for use as protective eyewear and should be selected according to
any identied eye injury hazard(s), and applicable to relevant occupational health and safety
regulations.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
Protective eyewear
Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
Clear eyewear offers no protection against glare from the sun.
It is advised that this eyewear should not be worn over prescription frames, as
there is the possibility that any impact may be transmitted to the prescription frame
creating a hazard for wearer.
No parts on this eyewear are replaceable or interchangeable. If any part of the
eyewear is deemed unt for use then the whole product should be discarded.
If wearing a respirator, make sure eyewear does not interfere with the tted seal.
The material used in the constructing of this product is hypo-allergic, but it is
possible an allergic reaction may be experienced by susceptible individuals. In the
case of a reaction, the user should remove the product and seek medical advice
from a qualied doctor.
Always inspect eyewear before each use! Damaged or dirty eyewear limits
protection and can reduce vision. If necessary, equipment should be cleaned,
repaired or replaced before use.
Eye protection should be suitable for and sufcient enough for the hazard and risk
identied in the task(s).
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1763882_1781067-9_1781070-2_v2_1118_02_dh_m_en
Comfort and Fit
Protective eyewear should t well. Safety spectacles and goggles should t with the
bridge properly supported on your nose.
The center of the lens should line up with the front of your eyes, with the frame being
as close to the face as possible.
Cleaning and Storage
Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as they
can cause damage to the housing, lens, or impair functionality.
Rinse using lukewarm water, then gently wipe dry using a soft non-abrasive bre cloth.
Store clean eyewear in a closed container protected from dust, moisture or damage.
Technical Data
a) General
Viewing glass ................................ Transparent
Material ......................................... Polycarbonate
Optical class ................................. 1
Side shielding ............................... Yes
Product life .................................... Max. 2 years
Operating conditions ..................... -5 to +45 ºC, 40 – 80 % RH
Storage conditions ........................ 5 to +35 ºC, 40 – 70 % RH
Item No. Dimensions (L x W x H) Weight
1763882 140 x 45 x 53 mm 22 g
1781067 160 x 80 x 76 mm 66 g
1781068 160 x 55 x 70 mm 40 g
1781069 140 x 70 x 43 mm 21 g
1781070 150 x 52 x 55 mm 31 g
1781071 145 x 55 x 47 mm 21 g
1781072 195 x 75 x 85 mm 150 g
b) Standards and Protection
Item No. Standard(s) Protection Class UV Filter
1763882 EN166:2001, EN170:2002 F 2C-1.2
1781067 EN166:2001 B -
1781068 EN166:2001, EN170:2002 F 2C-1.2
1781069 EN166:2001 F -
1781070 EN166:2001 EN 170:2002 F 2C-1.2
1781071 EN166:2001, EN170:2002 F 2C-1.2
1781072 EN166:2001 B -