Instructions

30
12. Technical data
a) General
Input voltage .....................................................20 V
Maximum torque ...............................................200 Nm
No load speed n
0
..............................................0-2300 min
-1
Chuck size ........................................................6.3 mm (1/4 in)
Operating / storage conditions ..........................10 to 45°C, 20 – 85 % RH
Dimensions (W x D x H) ...................................17 x 6 x 22 cm (without battery)
Weight ..............................................................1 kg (without battery)
b) Sound and vibration information
Noise emission value L
PA
..................................76 ± 3 dB(A)
Noise emission value L
WA
..................................87 ± 3 dB(A)
Vibration level ...................................................6.147 ± 1,5 m/s
2
Uncertainty K ....................................................1,50 m/s
2
The vibration emission level given has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. The declared vibration value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used.
Identify additional safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
c) Suitable battery pack and charger
Battery pack ......................................................Conrad Item No. 1881809, 1881810
Battery charger .................................................Conrad Item No. 1881811, 1881812