Manual

3. Intended use

The product is designed for machine-cutting tasks. Typical uses include polishing, cutting, grinding and engraving of

metal,ceramictiles,glass,plasticorwood.Theincluded,replaceableaccessories,suchastheexibleshaftwitha

handle,allowforbetterguidingofthetoolsandtheabilitytoworkinplacesthataredifculttoaccess.Theproduct

also features a blade sharpener and a special grinding tool to allow you to sharpen the blades. Additional tools not

included with the product (e.g. vices) may be required for certain tasks. This product is designed for household/DIY

tasks only. It must not be used in commercial areas. All applications not mentioned in the "Intended use" section are

considered as improper use. The multi-purpose tool is not designed to be used as a drill. Drill bits must only be used

together with the router attachment. The device must not be used for the following purposes:

- The processing of other materials not listed in the "Intended use" section,

- Use with a saw blade,

- Use as a stationary device,

- Use as a drive for other devices

Risk of injury!

This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom) must

be avoided under all circumstances.

For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes other than

those described above may damage the product. In addition, improper use can cause hazards such as a short circuit,

reorelectricshock.Readtheoperatinginstructionscarefullyandstoretheminasafeplace.Onlymakethisproduct

available to third parties together with its operating instructions.

4. Delivery contents

• Multi-purpose tool

• 60x cutting discs

• 40x sandpaper discs

• 10x grinding tools (with shaft) ø 3.2 mm

• 1x holder for sanding belts ø 3.2 mm

• 4x sanding belts/ring

• 2x drill bits ø 2.3/3.2 mm

• 2x diamond grinders ø 3.2 mm

• 2x holders with shaft ø 3.2 mm

• 4x felt pads

• 1x grinding stone

• 1x collet chuck ø 2.3 mm

• 1x wrench