Manual

4
Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
Intended use
The balancer is designed to balance the weight of tools and utensils in general and is to be
used by one operator at a time. The balancer may be used in an assembly line, in single
workplaces, in professional and private environments.
Delivery contents
• 1x spring balancer
• 2x stopper slide with bolts and nuts
Safety
This manual contains important information that the user must adhere to in order to use the
balancer safely. Be sure to have clearly understood all the instructions before using the
balancer. Failure to do so could cause injury.
Always operate, inspect and maintain this balancer in perfect working order in
accordance with all regulations pertinent to balancers, tools and workplaces.
User restrictions
• Do not permit children or people under age to use the balancer.
Personal safety
• Do not work, transit or linger underneath the balancer.
• When using balancers, always fully and duly comply with the standards and laws in force
in the country in which they are used.
• Wear necessary personal protective equipment.
Environment
• Do not use the balancer in environments with potentially explosive atmospheres.
• Only transport, operate and store within -10 to +40 °C, ≤90 % RH.