Manual

38
8.9 Causes of kickback and ways to prevent it
See Fig. 15.

Kickback can occur if the tip or topside of the bar comes into contact with wood or other solid objects, or if the
chain jams in the cut.

The power tool then kicks up and back with great force, which can cause serious personal injury, or death.

If the chain fastens along the top of the bar, this can cause the saw to be pressed back towards the user. This can
also result in serious personal injury or death.

Do not rely on the safety mechanisms on the power tool. The correct and careful way of working is the only reliable
method of reducing the risk of kickback.

Kickback occurs when the tool is used incorrectly and/or with the wrong work methods, or in the wrong conditions,
and can be avoided as follows.
– Hold the tool rmly with both hands and hold your arms in a position that prevents kickback. Kickback can
cause the tool to jerk backwards, but the user can control this by taking the appropriate measures. Keep a
rm grip on the handles with both hands.
– Do not overreach. Never saw above shoulder height. This ensures better control over the product in unex-
pected situations.
– Only use accessories recommended by the manufacturer. The use of other accessories can cause the chain
to break/or kickback.
– Follow the instructions to maintain the tool and sharpen the chain. A worn or incorrectly sharpened chain
increases the risk of kickback.
8.10 Reduction of noise and vibrations

To reduce noise and vibrations when in use, limit the time the product is used, and use low-power/vibration and
noise mode and suitable safety equipment.

Take the following precautions to minimise the risks of exposure to vibrations and/or noise.
– Only use the tool in accordance with these instructions.
– Make sure that the power tool is in good condition.
– Use sharp accessories in good condition and suitable for the purpose.
– Keep a rm grip on the handles/ grips.
– Maintain and lubricate the tool in accordance with these instructions.
– Plan the work so that exposure to heavy vibrations is spread over several days.
Important:

Read these instructions carefully before use, and familiarise yourself with the controls on the tool and how they
are used. Failure to follow all the instructions and safety instructions can result in the risk of electric shock, re
and/or serious personal injury.

Stay alert. Pay attention to what you are doing, and use your common sense when working with the power tool.
Quick precautions can prevent serious personal injury and/or material damage.

Switch off the power tool immediately and remove the battery if it is not working properly. A damaged product must
be checked and repaired by qualied personnel before being used again.