Specification

9
16
......................... ........................
................................ ................................
LIGHT FIXTURE INSTALLATION
Remove the 4 fixing screws from the light kit pan. Keep them for next step.
The metal cage has 4 slots. Raise up the metal cage by aligning the 4 slots to the
4 round holes from the light kit pan. Install the 4 screws removed previously into
the round holes of the light kit pan and tighten all 4 screws securely.
Note: Install a 23A 12V batteries by removing battery cover on back of transmitter,
installing batteries, and replacing battery cover. If desired, install the transmitter
holder onto the wall with included screws.
BRACKET OF TRANSMITTER INSTALLATION