Instructions / Assembly

7
Make wiring connections from the house
and the fan to the remote receiver (2) as
shown. Connect using wire nuts (1)
(provided). Make sure that all exposed
wiring is secured inside wire nuts. Refer
to Point 3 of Safety Tips on page 2.
N
BB
1
2
Once wiring step has been completed,
slide the wired remote receiver in
between the bracket and the top of the
downrod ball.
MOUNTING
............ ............ ................ ................
WIRING OPTIONS
10
11
SECURE TO CEILING
Loosen the 2 screws on the bottom of mounting bracket but do not remove them.
Raise the canopy up and align the keyholes on the bottom of the canopy with the 2
screws on the bottom of mounting bracket. Rotate the canopy until both screws
from the mounting bracket drop into the slot recesses. Tighten screws securely.
..................................... .....................................
12