Specifications

FCC Modular Usage Statement
Note 1: This module certified complies with RF exposure requirements under mobile or fixed
condition; this module is to be installed only in mobile or fixed applications.
A mobile device is defined as a transmitting device designed to be used in other than fixed
locations and to generally be used in such a way that a separation distance of at least 20
centimeters is normally maintained between the transmitter's radiating structure(s) and the
body of the user or nearby persons. Transmitting devices designed to be used by consumers
or workers that can be easily re-located, such as wireless devices associated with a personal
computer, are considered to be mobile devices if they meet the 20 centimeter separation
requirement.
A fixed device is defined as a device is physically secured at one location and is not able to
be easily moved to another location.
Note 2: Host product manufacturers must provide in their user manual the required RF
exposure information for mobile & fixed usage of this module. Host product manufacturers
must use the following RF exposure statement in their user manual “This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the
radiator and all persons. This transmitter must not be co-location or operating in
conjunction with any other antenna or transmitter.”
Note 3: Any modifications made to the module will void the Grant of Certification, this
module is limited to OEM installation only and must not be sold to end-users, end-user shall
have no manual instructions to remove or install the device, only software or operating
procedure shall be placed in the end-user operating manual of final products.
Note 4: Additional testing and certification may be necessary when multiple modules are
used.
Note 5: The module may be operated only with the integral chip antenna with which it is
authorized.
Note 6: To ensure compliance with all non-transmitter functions the host manufacturer is
responsible for ensuring compliance with the module(s) installed and fully operational. For
example, if a host was previously authorized as an unintentional radiator under the Supplier’s
Declaration of Conformity procedure without a transmitter certified module and a module is
added, the host manufacturer is responsible for ensuring that the after the module is
installed and operational the host continues to be compliant with the part 15B unintentional
radiator requirements. Since this may depend on the details of how the module is integrated
with the host, the manufacturer shall provide guidance to the host manufacturer for
compliance with the part 15B requirements.
Note 7: The FCC ID label on the final system must be labeled with “Contains FCC ID:
2AVUD-TC6203D” or “Contains transmitter module FCC ID: 2AVUD-TC6203D”.
Note 8: The FCC rule/s for this module are CFR 47 Part 15 Subpart C.
Note 9: This modular transmitter is only FCC authorized for the specific rule parts listed on its
grant. The host product manufacturer is responsible to any other FCC rules that apply to
the host not covered by the modular