User Manual

KIT INSPECTION
Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly, contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in the kit contents list on this page.
Top Flite Product Support
3002 N Apollo Drive Suite 1
Champaign, IL 61822
Telephone: [phone]
Fax: [phone]
E-mail:
PARTS PHOTOGRAPHED
1. Fuselage 2. Rudder
3. Canopy 4. Fiberglass cowl
5. Fiberglass air scoop 6. Fiberglass wing fairing
7. Cockpit parts 8. Tail gear doors
9. Wing joiner 10.Landing gear covers
11. Wings with flaps & ailerons 12. Horizontal stabilizer with elevators 13. (2) Fiberglass wing fillets 14. (2) Plastic machine guns 15. (2) Plastic engine exhaust outlets 16. (8) Engine mount spacers 17. Wheel covers 18. Servo hatches
PARTS NOT PHOTOGRAPHED
sheet-metal screws: (34) #2 x 3/8" (24-wing servo hatches, 6-landing
gear covers, 4-wheel covers)
(28) #4 x 1/2" Phillips-head (24-all control horns
except rudder, 4-tail gear mounting)
(8) #4 x 5/8" Phillips-head (4-rudder control horn,
4-cowl mounting)
(12) #6 x 1/2" (landing gear mounting) (8) #2 x 1/2" (2-landing gear covers, 2-fuel tank
floor, 4-forward servo tray)
(8) #2 x 3/16" (canopy mounting)
machine screws: (4) 2-56 x 3/8" (tail gear door brackets) (4) 4-40 x 3/8" (4-cowl reinforcement glue on) pushrods: (4) 4-40 x 4" wire pushrods (2-ailerons, 2-flaps) (3) 4-40 x 36" wire pushrods (2-elevators, 1-rudder) (6) 3/16" pushrod guide tubes (5-factory-installed in
fuselage, 1-throttle)
(1) 36" white, plastic pushrod (throttle) (1) 2-56 x 4" pushrod (air valve)
nylon hardware: (7) large control horns (2-ailerons, 2-flaps,
2-elevators, 1-rudder)
(2) 1/4-20 x 2" nylon wing bolts (1) ball link (throttle) (2) nylon clevis (1-throttle, 1-air valve) (14) pinned hinge points (for ailerons and flaps) metal hardware: (7) 4-40 threaded metal clevises (2-ailerons,
2-flaps, 2-elevator, 1-rudder)
(7) Large solder clevises (2-ailerons, 2-flaps,
2-elevator, 1-rudder)
- 6 -
1
2
12
5
3
4
15
16
17
9
14
14
13
8
18
6
10
11
11
7