User Instructions

3. If the corners are rounded like the one in this wing, cut “petals” the same
as the around the root of the wing.
4. Use your Trim Seal Tool to iron the covering down around and inside the
edges of the opening.
5. Because the corners of this hatch opening are rounded, we switched to
the rounded shoe of the Trim Seal Tool to iron the little petals down.
6. For the aileron hatch cover, iron a piece of oversize covering into place.
7. Use a straightedge to trim the edges of the covering just enough to provide
a little “wrap-around” under the bottom of the hatch.