User's Manual

Top Global USA. ----MB6000 User Guide
device. User must reboot the system, then the configuration will be saved. So if
user saves the configuration, and doesn’t reboot the device through web page,
the configuration information will be lost
Normally, MB6000 can’t be configured through WAN interface because of security
and other concerns. If user wishes to remotely configure the MB6000 through WAN
interface, there is one box to select to enable this feature.
Note:
Each time when the user modifies the username and password, the system
will request the user to re-authenticate using the new user name and
password.
3.4.1.2 Time
Figure 3-16 Time
- 21 -