User's Manual

Top Global USA. ----MB6000 User Guide
 Detailed Configurations
The access rules of the firewall in MB6000 have many access rule items. You can
maintain these rules with the operations of: Add, Delete, Move up, Move down, Apply.
z Default Policy: Factory default rules;
z Enable Checkbox: You can enable or disable a rule by check or uncheck this
checkbox;
z Move up, Move down: The sequence of the rules in the list is very important for
the firewall. When the firewall deals with a data packet, it will check the rules
from top to bottom in sequentially and execute the first rule which matches the
character of this packet. So please pay attention to the rules sequence when
you are using multiple rules;
z Apply Change: click the Apply Change button to validate the change
immediately. No reboot is required here;
z Add: Click the Add button, a pop up window for inputting an access rule will
appear:
Each rule is consisted of the following parameters:
Action: You have two options here: Block or Pass. Block means the data packet which
matches this rule will be blocked by firewall; Pass means the data packet which matches
- 37 -