User's Manual

Top Global USA. ----MB6000 User Guide
5. Press the RESET button.
6. Press and hold the RELOAD button for about 10 seconds immediately after you
press and release the RESET button until the POWER LED turns amber and the
WWAN LED turns off. Result: The MB6000 deletes the current MB6000 software
and Configuration files. Then MB6000 will download the software you have
prepared in the step 3. Observe the TFTP display and you should see
downloading activity begin after a few seconds.
7. After finished this procedure, MB6000 will boot automatically. and you can see
the POWER LED turns amber and blinks
8. MB6000 will be configured to the factory default value. Please refer Table 6-1 for
the factory default value.
Firmware Upgrade Procedure through Web
Use this procedure to upgrade the newest version firmware for MB6000 through Web
interface on user client. This procedure may be necessary when a new version firmware is
released(Figure 4-1).
Figure 4-1 Firmware upgrade
MB6000's firmware is upgraded through Firmware tab. Follow these instructions:
1. Download the firmware from Top Global’s website at
www.topglobalusa.com to your
host PC.
2. Enter the location of the firmware file or click the Browse button to find the file.
3. Then, click the Upgrade Firmware button to upgrade the firmware.
- 51 -